Summary: Use this article to learn how to revert a PowerView Repeater back to factory settings.

Body:

If a repeater is no longer functioning, or won’t pair to the PowerView® network, you can reset the repeater. These instructions are slightly different for the Gen 1 and Gen 2 repeaters.

To reset the Gen 1 repeater to factory default, press and hold the center button for six seconds. The green LED will come on to indicate the repeater has power and is ready to be joined to the PowerView shade network.

To reset the Gen 2 repeater to factory default, locate the button on the side of the repeater. Press and hold the button for six to eight seconds, until the light on the repeater flashes amber. The repeater is now ready to be joined to the PowerView network.

SME: